Cisco 8832 Administration Guide

GuidelinesPower Type
When you install a phone that is powered with external power, connect
the injector to power and to the Ethernet before you connect the USB-C
cable to the phone. When you remove a phone that uses external power,
disconnect the USB-C cable from the phone before you remove the
power from the adapter.
External power
• Non-PoE Ethernet deployment
with a Cisco IP Conference
Phone 8832 Non-PoE Ethernet
Injector
• Wi-Fi deployment with a
Cisco IP Conference Phone
8832 Power Adapter
• Non-PoE Ethernet deployment
with a Cisco IP Conference
Phone 8832 Ethernet Injector
and a Cisco IP Conference
Phone 8832 Power Adapter
Supported Network Protocols
The Cisco IP Conference Phone 8832 supports several industry-standard and Cisco network protocols that
are required for voice communication. The following table provides an overview of the network protocols
that the phones support.
Table 4: Supported Network Protocols on the Cisco IP Conference Phone
Usage NotesPurposeNetwork Protocol
—BootP enables a network device, such as
the phone, to discover certain startup
information, such as its IP address.
Bootstrap Protocol (BootP)
The phone uses CDP to communicate
information such as auxiliary VLAN ID,
per port power management details, and
Quality of Service (QoS) configuration
information with the Cisco Catalyst switch.
CDP is a device-discovery protocol that
runs on all Cisco-manufactured equipment.
A device can use CDP to advertise its
existence to other devices and receive
information about other devices in the
network.
Cisco Discovery Protocol (CDP)
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
17
About the Cisco IP Conference Phone
Supported Network Protocols

Cisco 8832 Specifications

General

Control type	Buttons
Display type	LCD
Product type	IP conference phone
Voice codecs	G.711a, G.711u, G.722, G.729A, G.729ab, OPUS, iLBC
Certification	CE Markings per directives 2014/30/EU and 2014/53/EU and 2014/35/EU \u2028 \u2028 UL 60950 Second Edition \u2028 CAN/CSA-C22.2 No. 60950 Second Edition \u2028 EN 60950 Second Edition (including A11 and A12) IEC 60950 Second Edition (including A11 and A12) EN 60950-1 IEC 60950-1 AS/NZS 60950.1 47CFR Part 15 (CFR 47) Class B AS/NZS CISPR32 Class B \u2028 CISPR32 \u2028Class B EN55032 \u2028 Class B EN 300 386 ICES003 Class B \u2028 VCCI Class B \u2028 EN61000-3-2 \u2028 EN61000-3-3 \u2028 EN61000-4-2 IEC61000-4-2 EN61000-4-3 IEC61000-4-3 EN61000-4-6 IEC61000-4-6 KN22 Class B \u2028 EN55024 \u2028 CISPR24 \u2028 KN24 Armadillo Light AS/ACIF S004 NZPTC220
Product color	Charcoal
Frequency range	100 - 20000 Hz
Built-in display	Yes
Display diagonal	3.9 \
Languages support	ARA, BUL, CAT, CHI (SIMPL), CHI (TR), CZE, DAN, DEU, DUT, ENG, ESP, EST, FIN, FRE, GRE, HEB, HUN, ITA, JPN, KOR, LAT, LIT, NOR, POL, POR, RUM, RUS, SER, SLK, SLV, SWE, TUR, UKR
Display resolution	480 x 128 pixels
Security algorithms	EAP-FAST, EAP-TLS, SHA-256, SSH
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Supported network protocols	IPv4, IPv6, SIP, SDP, UDP, DHCP, GARP, TFTP, HTTPS, RTP, RTCP, Cisco Discovery Protocol, LLDP
Cables included	USB
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %
USB connector type	USB Type-C
RJ-45 ports quantity	1

Weight and Dimensions

Width	278 mm
Height	61 mm
Weight	1850 g