Add Phones with a BAT Phone Template
The Cisco Unified Communications Bulk Administration Tool (BAT) enables you to perform batch operations,
including registration of multiple phones.
To add phones using BAT only (not in conjunction with TAPS), you must obtain the appropriate MAC address
for each phone.
For more information about using BAT, see the documentation for your particular Cisco Unified
Communications Manager release.
Procedure
Step 1 From Cisco Unified Communications Administration, choose Bulk Administration > Phones > Phone
Template.
Step 2 Click Add New.
Step 3 Choose a Phone Type and click Next.
Step 4 Enter the details of phone-specific parameters, such as Device Pool, Phone Button Template, and Device
Security Profile.
Step 5 Click Save.
Step 6 Select Device > Phone > Add New to add a phone using the BAT phone template.
Related Topics
Cisco Unified Communications Manager Documentation, on page 12
Add Users to Cisco Unified Communications Manager
You can display and maintain information about the users registered in Cisco Unified Communications
Manager. Cisco Unified Communications Manager also allows each user to perform these tasks:
• Access the corporate directory and other customized directories from a Cisco IP Phone.
• Create a personal directory.
• Set up speed dial and call forwarding numbers.
• Subscribe to services that are accessible from a Cisco IP Phone.
Procedure
Step 1 To add users individually, see Add a User Directly to Cisco Unified Communications Manager, on page 58.
Step 2 To add users in batches, use the Bulk Administration Tool. This method also enables you to set an identical
default password for all users.
For more information, see the documentation for your particular Cisco Unified Communications Manager
release.
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
57
Cisco IP Conference Phone Installation
Add Phones with a BAT Phone Template
To Next Page
Loading...
Need help?
General
Weight and Dimensions
