Cisco 8832 Administration Guide

For information about configuring Cisco Unified Communications Manager to work with the IP phones
described in this chapter, see the documentation for your particular Cisco Unified Communications Manager
release.
If the Cisco IP Phone model that you want to configure does not appear in the Phone Type drop-down list in
Cisco Unified Communications Manager Administration, install the latest support patch for your version of
Cisco Unified Communications Manager from Cisco.com.
Note
Related Topics
Cisco Unified Communications Manager Documentation, on page 12
Cisco Unified Communications Manager Express Interaction
When the Cisco IP Phone works with the Cisco Unified Communications Manager Express (Unified CME),
the phones must go into CME mode.
When a user invokes the conference feature, the tag allows the phone to use either a local or network hardware
conference bridge.
The Cisco IP Phones do not support the following actions:
• Transfer—Only supported in the connected call transfer scenario.
• Conference—Only supported in the connected call transfer scenario.
• Join—Supported using the Conference button or hookflash access.
• Hold—Supported using the Hold button.
• Barge and Merge—Not supported.
• Direct Transfer—Not supported.
• Select—Not supported.
The users cannot create conference and transfer calls across different lines.
Unified CME supports intercom calls, also known as whisper paging. But the page is rejected by the phone
during calls.
Voice Messaging System Interaction
Cisco Unified Communications Manager lets you integrate with different voice messaging systems, including
the Cisco Unity Connection voice messaging system. Because you can integrate with a variety of systems,
you must provide users with information about how to use your specific system.
You should provide the following information to each user:
• How to access the voice messaging system account.
Make sure that you have used the Cisco Unified Communications Manager to configure the Messages
button on the Cisco IP Phone.
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
21
About the Cisco IP Conference Phone
Cisco Unified Communications Manager Express Interaction

Cisco 8832 Specifications

General

Control type	Buttons
Display type	LCD
Product type	IP conference phone
Voice codecs	G.711a, G.711u, G.722, G.729A, G.729ab, OPUS, iLBC
Certification	CE Markings per directives 2014/30/EU and 2014/53/EU and 2014/35/EU \u2028 \u2028 UL 60950 Second Edition \u2028 CAN/CSA-C22.2 No. 60950 Second Edition \u2028 EN 60950 Second Edition (including A11 and A12) IEC 60950 Second Edition (including A11 and A12) EN 60950-1 IEC 60950-1 AS/NZS 60950.1 47CFR Part 15 (CFR 47) Class B AS/NZS CISPR32 Class B \u2028 CISPR32 \u2028Class B EN55032 \u2028 Class B EN 300 386 ICES003 Class B \u2028 VCCI Class B \u2028 EN61000-3-2 \u2028 EN61000-3-3 \u2028 EN61000-4-2 IEC61000-4-2 EN61000-4-3 IEC61000-4-3 EN61000-4-6 IEC61000-4-6 KN22 Class B \u2028 EN55024 \u2028 CISPR24 \u2028 KN24 Armadillo Light AS/ACIF S004 NZPTC220
Product color	Charcoal
Frequency range	100 - 20000 Hz
Built-in display	Yes
Display diagonal	3.9 \
Languages support	ARA, BUL, CAT, CHI (SIMPL), CHI (TR), CZE, DAN, DEU, DUT, ENG, ESP, EST, FIN, FRE, GRE, HEB, HUN, ITA, JPN, KOR, LAT, LIT, NOR, POL, POR, RUM, RUS, SER, SLK, SLV, SWE, TUR, UKR
Display resolution	480 x 128 pixels
Security algorithms	EAP-FAST, EAP-TLS, SHA-256, SSH
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Supported network protocols	IPv4, IPv6, SIP, SDP, UDP, DHCP, GARP, TFTP, HTTPS, RTP, RTCP, Cisco Discovery Protocol, LLDP
Cables included	USB
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %
USB connector type	USB Type-C
RJ-45 ports quantity	1

Weight and Dimensions

Width	278 mm
Height	61 mm
Weight	1850 g