Cisco 8832 Administration Guide

1. Any manually assigned IPv4 TFTP servers
2. Any manually assigned IPv6 servers
3. DHCP assigned TFTP servers
4. DHCPv6 assigned TFTP servers
For information about the CTL and ITL files, see the Cisco Unified Communications Manager Security Guide.
Set Domain Name Field
Procedure
Step 1 Set the DHCP Enabled option to No.
Step 2 Scroll to the Domain Name option, press Select, and enter a new domain name.
Step 3 Press Apply.
Enable Wireless LAN from the Phone
Ensure that the Wi-Fi coverage in the location where the wireless LAN is deployed is suitable for transmitting
voice packets.
A fast-secure roaming method is recommended for Wi-Fi users. We recommend that you use 802.11r (FT).
For complete configuration information, see the Cisco IP Phone 8832 Wireless LAN Deployment Guide at
this location:
https://www.cisco.com/c/en/us/support/collaboration-endpoints/unified-ip-phone-8800-series/
products-implementation-design-guides-list.html
The Cisco IP Phone 8832 Wireless LAN Deployment Guide includes the following configuration information:
• Wireless network configuration
• Wireless network configuration in Cisco Unified Communications Manager Administration
• Wireless network configuration on the Cisco IP Phone
Before you begin
Make sure that Wi-Fi is enabled on the phone, and the Ethernet cable is disconnected.
Procedure
Step 1 To enable the application, press Settings.
Step 2 Navigate to Admin settings > Network setup > Wi-Fi client setup > Wireless.
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
42
Cisco IP Conference Phone Installation
Set Domain Name Field

Cisco 8832 Specifications

General

Control type	Buttons
Display type	LCD
Product type	IP conference phone
Voice codecs	G.711a, G.711u, G.722, G.729A, G.729ab, OPUS, iLBC
Certification	CE Markings per directives 2014/30/EU and 2014/53/EU and 2014/35/EU \u2028 \u2028 UL 60950 Second Edition \u2028 CAN/CSA-C22.2 No. 60950 Second Edition \u2028 EN 60950 Second Edition (including A11 and A12) IEC 60950 Second Edition (including A11 and A12) EN 60950-1 IEC 60950-1 AS/NZS 60950.1 47CFR Part 15 (CFR 47) Class B AS/NZS CISPR32 Class B \u2028 CISPR32 \u2028Class B EN55032 \u2028 Class B EN 300 386 ICES003 Class B \u2028 VCCI Class B \u2028 EN61000-3-2 \u2028 EN61000-3-3 \u2028 EN61000-4-2 IEC61000-4-2 EN61000-4-3 IEC61000-4-3 EN61000-4-6 IEC61000-4-6 KN22 Class B \u2028 EN55024 \u2028 CISPR24 \u2028 KN24 Armadillo Light AS/ACIF S004 NZPTC220
Product color	Charcoal
Frequency range	100 - 20000 Hz
Built-in display	Yes
Display diagonal	3.9 \
Languages support	ARA, BUL, CAT, CHI (SIMPL), CHI (TR), CZE, DAN, DEU, DUT, ENG, ESP, EST, FIN, FRE, GRE, HEB, HUN, ITA, JPN, KOR, LAT, LIT, NOR, POL, POR, RUM, RUS, SER, SLK, SLV, SWE, TUR, UKR
Display resolution	480 x 128 pixels
Security algorithms	EAP-FAST, EAP-TLS, SHA-256, SSH
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Supported network protocols	IPv4, IPv6, SIP, SDP, UDP, DHCP, GARP, TFTP, HTTPS, RTP, RTCP, Cisco Discovery Protocol, LLDP
Cables included	USB
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %
USB connector type	USB Type-C
RJ-45 ports quantity	1

Weight and Dimensions

Width	278 mm
Height	61 mm
Weight	1850 g