• DND Incoming Call Alert: Choose the type of alert, if any, to play on a phone for incoming calls when
DND is active.
This parameter is located on in the Common Phone Profile window and the Phone Configuration
window. The Phone Configuration window value takes precedence.
Note
Step 4 Select Save.
Related Topics
Cisco Unified Communications Manager Documentation, on page 12
Set Up Call Forward Notification
You can control the call forward settings.
Procedure
Step 1 In Cisco Unified Communications Manager Administration, select Device > Phone.
Step 2 Locate the phone to be set up.
Step 3 Configure the Call Forward Notification fields.
DescriptionField
When this check box is checked, the caller name displays in the notification
window.
By default, this check box is checked.
Caller Name
When this check box is checked, the caller number displays in the notification
window.
By default, this check box is not checked.
Caller Number
When this check box is checked, the information about the caller who last
forwarded the call displays in the notification window.
Example: If Caller A calls B, but B has forwarded all calls to C and C has
forwarded all calls to D, the notification box that D sees contains the phone
information for caller C.
By default, this check box is not checked.
Redirected Number
When this check box is checked, the information about the original recipient
of the call displays in the notification window.
Example: If Caller A calls B, but B has forwarded all calls to C and C has
forwarded all calls to D, then the notification box that D sees contains the
phone information for caller B.
By default, this check box is checked.
Dialed Number
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
110
Cisco IP Conference Phone Administration
Set Up Call Forward Notification
To Next Page
Loading...
Need help?
General
Weight and Dimensions
