Wireless Expansion Microphone
The Cisco IP Conference Phone 8832 supports two expansion wireless microphones, available with a charging
cradle in an optional kit. When the wireless microphone is placed on the charging cradle for charging, the
LED on the cradle is lit white.
Figure 4: Wireless Microphone
Figure 5: Wireless Microphone Mounted on the Charging Cradle
When the conference phone is in a call, the expansion microphone LED around the Mute button is lit
green.
When the microphone is muted, the LED is lit red. When you press the Mute button, the phone and the
expansion microphones are muted.
If the phone is paired with a wireless microphone (for example, Wireless microphone 1) and you connect the
wireless microphone to a charger, pressing the Show detail softkey indicates the charge level for that
microphone.
When the phone is paired with a wireless microphone and you connect a wired microphone, the wireless
microphone gets unpaired and the phone is paired with the wired microphone. A notification appears on the
phone screen indicating that the wired microphone is connected.
Related Topics
Install the Wireless Expansion Microphones, on page 32
Install the Wireless Microphone Charging Cradle, on page 33
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
11
About the Cisco IP Conference Phone
Wireless Expansion Microphone
To Next Page
Loading...
