Cisco 8832 Administration Guide

You can control access to the Settings menu by using the Settings Access field in the Cisco Unified
Communications Manager Administration Phone Configuration window.
Note
Step 4 Choose LSC and press Select or Update.
The phone prompts for an authentication string.
Step 5 Enter the authentication code and press Submit.
The phone begins to install, update, or remove the LSC, depending on how the CAPF is configured. During
the procedure, a series of messages appears in the LSC option field in the Security Configuration menu, so
you can monitor progress. When the procedure is complete, Installed or Not Installed displays on the phone.
The LSC install, update, or removal process can take a long time to complete.
When the phone installation procedure is successful, the Installed message displays. If the phone displays
Not Installed, then the authorization string may be incorrect or the phone upgrade may not be enabled.
If the CAPF operation deletes the LSC, the phone displays Not Installed to indicate that the operation
succeeded. The CAPF server logs the error messages. See the CAPF server documentation to locate the logs
and to understand the meaning of the error messages.
Related Topics
Cisco Unified Communications Manager Documentation, on page 12
Enable FIPS Mode
Procedure
Step 1 In Cisco Unified Communications Manager Administration, select Device > Phone and locate the phone.
Step 2 Navigate to the Product Specific Configuration area.
Step 3 Set the FIPS Mode field to Enabled.
Step 4 Select Apply Config.
Step 5 Select Save.
Step 6 Restart the phone.
Phone Call Security
When security is implemented for a phone, you can identify secure phone calls by icons on the phone screen.
You can also determine whether the connected phone is secure and protected if a security tone plays at the
beginning of the call.
In a secure call, all call signaling and media streams are encrypted. A secure call offers a high level of security,
providing integrity and privacy to the call. When a call in progress is encrypted, the call progress icon to the
right of the call duration timer in the phone screen changes to the following icon: .
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
73
Cisco IP Conference Phone Administration
Enable FIPS Mode

Cisco 8832 Specifications

General

Control type	Buttons
Display type	LCD
Product type	IP conference phone
Voice codecs	G.711a, G.711u, G.722, G.729A, G.729ab, OPUS, iLBC
Certification	CE Markings per directives 2014/30/EU and 2014/53/EU and 2014/35/EU \u2028 \u2028 UL 60950 Second Edition \u2028 CAN/CSA-C22.2 No. 60950 Second Edition \u2028 EN 60950 Second Edition (including A11 and A12) IEC 60950 Second Edition (including A11 and A12) EN 60950-1 IEC 60950-1 AS/NZS 60950.1 47CFR Part 15 (CFR 47) Class B AS/NZS CISPR32 Class B \u2028 CISPR32 \u2028Class B EN55032 \u2028 Class B EN 300 386 ICES003 Class B \u2028 VCCI Class B \u2028 EN61000-3-2 \u2028 EN61000-3-3 \u2028 EN61000-4-2 IEC61000-4-2 EN61000-4-3 IEC61000-4-3 EN61000-4-6 IEC61000-4-6 KN22 Class B \u2028 EN55024 \u2028 CISPR24 \u2028 KN24 Armadillo Light AS/ACIF S004 NZPTC220
Product color	Charcoal
Frequency range	100 - 20000 Hz
Built-in display	Yes
Display diagonal	3.9 \
Languages support	ARA, BUL, CAT, CHI (SIMPL), CHI (TR), CZE, DAN, DEU, DUT, ENG, ESP, EST, FIN, FRE, GRE, HEB, HUN, ITA, JPN, KOR, LAT, LIT, NOR, POL, POR, RUM, RUS, SER, SLK, SLV, SWE, TUR, UKR
Display resolution	480 x 128 pixels
Security algorithms	EAP-FAST, EAP-TLS, SHA-256, SSH
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Supported network protocols	IPv4, IPv6, SIP, SDP, UDP, DHCP, GARP, TFTP, HTTPS, RTP, RTCP, Cisco Discovery Protocol, LLDP
Cables included	USB
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %
USB connector type	USB Type-C
RJ-45 ports quantity	1

Weight and Dimensions

Width	278 mm
Height	61 mm
Weight	1850 g