Cisco 8832 - Page 108

DescriptionDefaultField Type
Or Choices
Field Name
Determines whether you allow the EnergyWise domain
controller policy to send power level updates to the
phones. The following conditions apply:
• One or more days must be selected in the Enable
Power Save Plus field.
• The settings in Cisco Unified Communications
Manager Administration take effect on schedule
even if EnergyWise sends an override.
For example, assuming the Phone Off Time is set to
22:00 (10:00 p.m.), the value in the Phone On Time
field is 06:00 (6:00 a.m.), and the Enable Power Save
Plus has one or more days selected.
• If EnergyWise directs the phone to turn off at
20:00 (8:00 p.m.), that directive remains in effect
(assuming no phone user intervention occurs)
until the configured Phone On Time at 6:00 a.m.
• At 6:00 a.m., the phone turns on and resumes
receiving the power level changes from the
settings in Cisco Unified Communications
Manager Administration.
• To change the power level on the phone again,
EnergyWise must reissue a new power level
change command.
To disable Power Save Plus, you must uncheck the
Allow EnergyWise Overrides check box. If the Allow
EnergyWise Overrides remains checked but no days
are selected in the Enable Power Save Plus field, Power
Save Plus is not disabled.
See Set Up EnergyWise.
UncheckedCheck boxAllow EnergyWise
Overrides
Controls the ability of a user to join and transfer calls.
• Same line enable—Users can directly transfer or
join a call on the current line to another call on
the same line.
• Same line disable— Users can't join or transfer
calls on the same line. The join and transfer
features are disabled and the user can't do the
direct transfer or join function.
Same line, across line
enable
Same line enable
Same line disable
Join And Direct Transfer
Policy
Controls the playing of the tone when a user is
recording a call
DisabledDisabled
Enabled
Recording Tone
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
98
Cisco IP Conference Phone Administration
Product Specific Configuration