Cisco 8832 Administration Guide

DescriptionField
Time each day that the display turns on automatically
(except on the days specified in the Days Display Not
Active field).
Enter the time in this field in 24-hour format, where
0:00 is midnight.
For example, to automatically turn the display on at
07:00 a.m., (0700), enter 07:00. To turn the display
on at 02:00 p.m. (1400), enter 14:00.
If this field is blank, the display will automatically
turn on at 0:00.
Display On Time
Length of time that the display remains on after
turning on at the time specified in the Display On
Time field.
Enter the value in this field in the format
hours:minutes.
For example, to keep the display on for 4 hours and
30 minutes after it turns on automatically, enter 04:30.
If this field is blank, the phone will turn off at the end
of the day (0:00).
If Display On Time is 0:00 and the display
on duration is blank (or 24:00), the display
will remain on continuously.
Note
Display On Duration
Length of time that the phone is idle before the display
turns off. Applies only when the display was off as
scheduled and was turned on by a user (by pressing
a button on the phone or lifting the handset).
Enter the value in this field in the format
hours:minutes.
For example, to turn the display off when the phone
is idle for 1 hour and 30 minutes after a user turns the
display on, enter 01:30.
The default value is 01:00.
Display Idle Timeout
Step 4 Select Save.
Step 5 Select Apply Config.
Step 6 Restart the phone.
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
105
Cisco IP Conference Phone Administration
Schedule Power Save for Cisco IP Phone

Cisco 8832 Specifications

General

Control type	Buttons
Display type	LCD
Product type	IP conference phone
Voice codecs	G.711a, G.711u, G.722, G.729A, G.729ab, OPUS, iLBC
Certification	CE Markings per directives 2014/30/EU and 2014/53/EU and 2014/35/EU \u2028 \u2028 UL 60950 Second Edition \u2028 CAN/CSA-C22.2 No. 60950 Second Edition \u2028 EN 60950 Second Edition (including A11 and A12) IEC 60950 Second Edition (including A11 and A12) EN 60950-1 IEC 60950-1 AS/NZS 60950.1 47CFR Part 15 (CFR 47) Class B AS/NZS CISPR32 Class B \u2028 CISPR32 \u2028Class B EN55032 \u2028 Class B EN 300 386 ICES003 Class B \u2028 VCCI Class B \u2028 EN61000-3-2 \u2028 EN61000-3-3 \u2028 EN61000-4-2 IEC61000-4-2 EN61000-4-3 IEC61000-4-3 EN61000-4-6 IEC61000-4-6 KN22 Class B \u2028 EN55024 \u2028 CISPR24 \u2028 KN24 Armadillo Light AS/ACIF S004 NZPTC220
Product color	Charcoal
Frequency range	100 - 20000 Hz
Built-in display	Yes
Display diagonal	3.9 \
Languages support	ARA, BUL, CAT, CHI (SIMPL), CHI (TR), CZE, DAN, DEU, DUT, ENG, ESP, EST, FIN, FRE, GRE, HEB, HUN, ITA, JPN, KOR, LAT, LIT, NOR, POL, POR, RUM, RUS, SER, SLK, SLV, SWE, TUR, UKR
Display resolution	480 x 128 pixels
Security algorithms	EAP-FAST, EAP-TLS, SHA-256, SSH
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Supported network protocols	IPv4, IPv6, SIP, SDP, UDP, DHCP, GARP, TFTP, HTTPS, RTP, RTCP, Cisco Discovery Protocol, LLDP
Cables included	USB
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %
USB connector type	USB Type-C
RJ-45 ports quantity	1

Weight and Dimensions

Width	278 mm
Height	61 mm
Weight	1850 g