Cisco 8832 Administration Guide

Possible Explanation and ActionDescriptionMessage
Phone has CTL and ITL files installed and
it failed to update the new CTL and ITL
files.
Possible reasons for failure:
• Network failure occurred.
• TFTP server was down.
• The new security token that was used
to sign CTL file and the TFTP
certificate that was used to sign ITL
file are introduced, but are not
available in the current CTL and ITL
files in the phone.
• Internal phone failure occurred.
Possible solutions:
• Check network connectivity.
• Check whether the TFTP server is
active and functioning normally.
• If the Transactional Vsam Services
(TVS) server is supported on Cisco
Unified Communications Manager,
check whether the TVS server is active
and functioning normally.
• Verify whether the security token and
the TFTP server are valid.
Manually delete the CTL and ITL files if
all the preceding solutions fail; reset the
phone.
For more information about trust lists, see
the documentation for your particular Cisco
Unified Communications Manager release.
Update of the CTL and ITL files failed.Trust List Update Failed
None. This message is informational only.
For more information about trust lists, see
the documentation for your particular Cisco
Unified Communications Manager release.
The CTL file, the ITL file, or both files are
updated.
Trust List Updated
Make sure that the phone load file has the
correct name.
The name of the phone load file is incorrect.Version Error
None. This message indicates the name of
the configuration file for the phone.
Name of the configuration file.XmlDefault.cnf.xml, or .cnf.xml
corresponding to the phone device name
Related Topics
Cisco Unified Communications Manager Documentation, on page 12
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
130
Cisco IP Conference Phone Troubleshooting
Status Messages Fields

Cisco 8832 Specifications

General

Control type	Buttons
Display type	LCD
Product type	IP conference phone
Voice codecs	G.711a, G.711u, G.722, G.729A, G.729ab, OPUS, iLBC
Certification	CE Markings per directives 2014/30/EU and 2014/53/EU and 2014/35/EU \u2028 \u2028 UL 60950 Second Edition \u2028 CAN/CSA-C22.2 No. 60950 Second Edition \u2028 EN 60950 Second Edition (including A11 and A12) IEC 60950 Second Edition (including A11 and A12) EN 60950-1 IEC 60950-1 AS/NZS 60950.1 47CFR Part 15 (CFR 47) Class B AS/NZS CISPR32 Class B \u2028 CISPR32 \u2028Class B EN55032 \u2028 Class B EN 300 386 ICES003 Class B \u2028 VCCI Class B \u2028 EN61000-3-2 \u2028 EN61000-3-3 \u2028 EN61000-4-2 IEC61000-4-2 EN61000-4-3 IEC61000-4-3 EN61000-4-6 IEC61000-4-6 KN22 Class B \u2028 EN55024 \u2028 CISPR24 \u2028 KN24 Armadillo Light AS/ACIF S004 NZPTC220
Product color	Charcoal
Frequency range	100 - 20000 Hz
Built-in display	Yes
Display diagonal	3.9 \
Languages support	ARA, BUL, CAT, CHI (SIMPL), CHI (TR), CZE, DAN, DEU, DUT, ENG, ESP, EST, FIN, FRE, GRE, HEB, HUN, ITA, JPN, KOR, LAT, LIT, NOR, POL, POR, RUM, RUS, SER, SLK, SLV, SWE, TUR, UKR
Display resolution	480 x 128 pixels
Security algorithms	EAP-FAST, EAP-TLS, SHA-256, SSH
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Supported network protocols	IPv4, IPv6, SIP, SDP, UDP, DHCP, GARP, TFTP, HTTPS, RTP, RTCP, Cisco Discovery Protocol, LLDP
Cables included	USB
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %
USB connector type	USB Type-C
RJ-45 ports quantity	1

Weight and Dimensions

Width	278 mm
Height	61 mm
Weight	1850 g