Cisco 8832 Administration Guide

DescriptionItem
Host names or IP addresses, in prioritized order, of
the Cisco Unified Communications Manager servers
with which the phone can register. An item can also
show the IP address of an SRST router that is capable
of providing limited Cisco Unified Communications
Manager functionality, if such a router is available.
For an available server, an item shows the Cisco
Unified Communications Manager server IP address
and one of the following states:
• Active: Cisco Unified Communications Manager
server from which the phone is currently
receiving call-processing services
• Standby: Cisco Unified Communications
Manager server to which the phone switches if
the current server becomes unavailable
• Blank: No current connection to this Cisco
Unified Communications Manager server
An item may also include the Survivable Remote Site
Telephony (SRST) designation, which identifies an
SRST router capable of providing Cisco Unified
Communications Manager functionality with a limited
feature set. This router assumes control of call
processing if all other Cisco Unified Communications
Manager servers become unreachable. The SRST
Cisco Unified Communications Manager always
appears last in the list of servers, even if it is active.
You configure the SRST router address in the Device
Pool section in Cisco Unified Communications
Manager Configuration window.
Unified CM 1-5
URL of the help text that appears on the phone.Information URL
URL of the server from which the phone obtains
directory information.
Directories URL
URL of the server from which the phone obtains
message services.
Messages URL
URL of the server from which the phone obtains Cisco
IP Phone services.
Services URL
URL that the phone displays when the phone is idle
for the time that the Idle URL Time field specifies
and no menu is open.
Idle URL
Number of seconds that the phone is idle and no menu
is open before the XML service that the Idle URL
specifies activates.
Idle URL Time
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
140
Cisco IP Conference Phone Troubleshooting
Network Setup Web Page

Cisco 8832 Specifications

General

Control type	Buttons
Display type	LCD
Product type	IP conference phone
Voice codecs	G.711a, G.711u, G.722, G.729A, G.729ab, OPUS, iLBC
Certification	CE Markings per directives 2014/30/EU and 2014/53/EU and 2014/35/EU \u2028 \u2028 UL 60950 Second Edition \u2028 CAN/CSA-C22.2 No. 60950 Second Edition \u2028 EN 60950 Second Edition (including A11 and A12) IEC 60950 Second Edition (including A11 and A12) EN 60950-1 IEC 60950-1 AS/NZS 60950.1 47CFR Part 15 (CFR 47) Class B AS/NZS CISPR32 Class B \u2028 CISPR32 \u2028Class B EN55032 \u2028 Class B EN 300 386 ICES003 Class B \u2028 VCCI Class B \u2028 EN61000-3-2 \u2028 EN61000-3-3 \u2028 EN61000-4-2 IEC61000-4-2 EN61000-4-3 IEC61000-4-3 EN61000-4-6 IEC61000-4-6 KN22 Class B \u2028 EN55024 \u2028 CISPR24 \u2028 KN24 Armadillo Light AS/ACIF S004 NZPTC220
Product color	Charcoal
Frequency range	100 - 20000 Hz
Built-in display	Yes
Display diagonal	3.9 \
Languages support	ARA, BUL, CAT, CHI (SIMPL), CHI (TR), CZE, DAN, DEU, DUT, ENG, ESP, EST, FIN, FRE, GRE, HEB, HUN, ITA, JPN, KOR, LAT, LIT, NOR, POL, POR, RUM, RUS, SER, SLK, SLV, SWE, TUR, UKR
Display resolution	480 x 128 pixels
Security algorithms	EAP-FAST, EAP-TLS, SHA-256, SSH
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Supported network protocols	IPv4, IPv6, SIP, SDP, UDP, DHCP, GARP, TFTP, HTTPS, RTP, RTCP, Cisco Discovery Protocol, LLDP
Cables included	USB
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %
USB connector type	USB Type-C
RJ-45 ports quantity	1

Weight and Dimensions

Width	278 mm
Height	61 mm
Weight	1850 g