Cisco 8832 - Page 71

NotesSupportedFeature
YesAuto Answer
YesCall Waiting
YesCaller ID
Conference is the only feature supported due
to other feature limitations.
YesUnified Session Presentation
Voicemail will not be synchronized with other
users in the Cisco Unified Communications
Manager cluster.
YesVoicemail
Forward state is only available on the phone
that sets the forward because there are no
shared line appearances in SRST mode. The
Call Forward All settings are not preserved
on failover to SRST from the Cisco Unified
Communications Manager, or from SRST
fail-back to the Communications Manager.
Any original Call Forward All still active on
the Communications Manager should be
indicated when the device reconnects to the
Communications Manager after failover.
YesCall Forward All
YesSpeed Dial
The iDivert softkey does not display.NoTo Voicemail (iDivert)
Lines are supported but cannot be shared.PartialLine Filters
The Park softkey does not display.NoPark Monitoring
Message count badges appear on the phone
screen.
YesEnhanced Message Waiting
Indication
The softkey does not display.NoDirected Call Park
YesHold Reversion
Calls appear as Local Hold calls.NoRemote Hold
The Meet Me softkey does not display.NoMeet Me
YesPickUp
The softkey does not display.NoGroup PickUp
The softkey does not display.NoOther PickUp
YesMalicious Call ID
YesQRT
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
61
Cisco IP Conference Phone Installation
Survivable Remote Site Telephony