Cisco Catalyst 3850 series User Manual

Document TitleRelated Topic
•
IP Multicast: PIM Configuration Guide, Cisco
IOS XE Release 3SE (Catalyst 3850 Switches)
•
IP Multicast: IGMP Configuration Guide, Cisco
IOS XE Release 3SE (Catalyst 3850 Switches)
•
IP Multicast: Multicast Optimization
Configuration Guide, Cisco IOS XE Release
3SE (Catalyst 3850 Switches)
Platform-independent configuration information
Cisco IOS Master Commands List, All Releases
Cisco IOS commands
Error Message Decoder
LinkDescription
https://www.cisco.com/cgi-bin/Support/Errordecoder/
index.cgi
To help you research and resolve system error
messages in this release, use the Error Message
Decoder tool.
Standards and RFCs
TitleStandard/RFC
Protocol-Independent Multicast-Sparse Mode
(PIM-SM): Protocol Specification
RFC 4601
MIBs
MIBs LinkMIB
To locate and download MIBs for selected platforms,
Cisco IOS releases, and feature sets, use Cisco MIB
Locator found at the following URL:
http://www.cisco.com/go/mibs
All supported MIBs for this release.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
OL-32598-01 285
Configuring SSM
Additional References

Cisco Catalyst 3850 series Specifications

General

Model	Cisco Catalyst 3850 Series
RAM	4 GB
Flash Memory	4 GB
Stacking Bandwidth	480 Gbps
Device Type	Switch
Enclosure Type	Rack-mountable
Routing Protocol	OSPF, EIGRP, BGP, RIP
Remote Management Protocol	SNMP, CLI, HTTP, HTTPS
Features	Quality of Service (QoS)
Stacking	Yes
Memory	4 GB RAM
Operating System	Cisco IOS
Relative Humidity	10 - 95% (non-condensing)
Power Supply Options	AC or DC
Ports	24 or 48 10/100/1000 Ethernet ports