•
Use any Telnet TCP/IP or encrypted Secure Shell (SSH) package from a remote management station.
The device must have network connectivity with the Telnet or SSH client, and the device must have an
enable secret password configured.
•
The device supports up to 16 simultaneous Telnet sessions. Changes made by one Telnet user are
reflected in all other Telnet sessions.
•
The device supports up to five simultaneous secure SSH sessions.
After you connect through the console port, through the Ethernet management port, through a Telnet
session or through an SSH session, the user EXEC prompt appears on the management station.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
12 OL-32598-01
Using the Command-Line Interface
Accessing the CLI Through a Console Connection or Through Telnet
To Next Page
Loading...
