Configuring IPSec with a Windows 2000 or XP Computer
How to Establish a Secure IPSec Tunnel
Cisco RVS4000 Security Router with VPN Administrator Guide 144
C
Establishing a Secure IPSec Tunnel
STEP 1 Create an IPSec policy.
a. Click Start, select Run, and type secpol.msc in the Open field. The Local
Security Settings window appears.
Local Security Settings
b. Right-click IP Security Policies on Local Computer (Windows XP) or IP
Security Policies on Local Machine (Windows 2000), and click Create IP
Security Policy.
c. Click the Next button, and then enter a name for your policy (for example,
to_Router). Then, click Next.
d. Uncheck the Activate the default response rule box, and then click Next.
e. Click Finish, making sure the Edit box is checked.
STEP 2 Build filter lists.
NOTE Throughout this section the term “win” refers to both Windows 2000 and
Windows XP.
To Next Page
Loading...
