Name: Cisco RVS4000 - Gigabit Security Router
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Setting Up and Configuring the Router

Firewall

Cisco RVS4000 Security Router with VPN Administrator Guide 56

Firewall > Port Range Triggering

Application Name Enter the name of the application you wish to configure.

Triggered Range For each application, list the triggered port number range.

These ports are used by outgoing traffic. Check with the Internet application

documentation for the port number(s) needed. In the first field, enter the starting

port number of the Triggered Range. In the second field, enter the ending port

number of the Triggered Range.

Forwarded Range For each application, list the forwarded port number range.

These ports are used by incoming traffic. Check with the Internet application

documentation for the port number(s) needed. In the first field, enter the starting

port number of the Forwarded Range. In the second field, enter the ending port

number of the Forwarded Range.

Enabled Click the Enabled checkbooks to enable port range triggering for the

relevant application.

Click Save to save your changes, or click Cancel to undo your changes.

Other manuals for Cisco RVS4000 - Gigabit Security Router

Questions and Answers:

Need help?

Do you have a question about the Cisco RVS4000 - Gigabit Security Router and is the answer not in the manual?

General