Name: Cisco RVS4000 - Gigabit Security Router
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Cisco RVS4000 Security Router with VPN Administrator Guide 166

Gateway-to-Gateway VPN Tunnel

Overview

This appendix explains how to configure an IPSec VPN tunnel between two VPN

routers by example. Two computers are used to test the liveliness of the tunnel.

These sections are included:

• Before You Begin, page166

• Configuration when the Remote Gateway Uses a Static IP Address,

page167

• Configuration when the Remote Gateway Uses a Dynamic IP Address,

page172

• Configuration When Both Gateways Use Dynamic IP Addresses,

page177

Before You Begin

You need this equipment:

• Two Windows desktop computers (each computer will be connected to a

VPN router)

• Two VPN routers (4-Port Gigabit Security Router with VPN, model number

RVS4000, and 10/100 8-Port VPN Router, model number RV082) that are

both connected to the Internet

Any VPN router can be deployed, such as the 10/100 16-, 8-, or 4-Port VPN Router

(model numbers RV016, RV082, or RV042); however, this example uses the

RV082.

Other manuals for Cisco RVS4000 - Gigabit Security Router

Questions and Answers:

Need help?

Do you have a question about the Cisco RVS4000 - Gigabit Security Router and is the answer not in the manual?

General