Name: Cisco RVS4000 - Gigabit Security Router
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Setting Up and Configuring the Router

L2 Switch

Cisco RVS4000 Security Router with VPN Administrator Guide 89

L2 Switch > VLAN Membership

VLAN ID Select the VLAN whose membership you want to configure.

Description Enter a VLAN group name of up to 50 characters.

Function/Port table The top half of the table indicates each port’s current mode

(Untagged, Tagged, or Trunk). The lower half of the table is used to assign port

membership for the selected VLAN. The default for each port is Exclude (the port

is not a member of the VLAN). To make a port a member of the VLAN, select the

applicable mode(s). For example, if the port mode is Untagged, select Untagged; if

the mode is Tagged, select Tagged; if the mode is Trunk, select either Tagged or

Untagged.

Other manuals for Cisco RVS4000 - Gigabit Security Router

Questions and Answers:

Need help?

Do you have a question about the Cisco RVS4000 - Gigabit Security Router and is the answer not in the manual?

General