Setting Up and Configuring the Router
Setup
Cisco RVS4000 Security Router with VPN Administrator Guide 41
5
Setup > DMZ
DMZ Hosting This feature allows one local PC to be exposed to the Internet for
use of a special-purpose service such as Internet gaming and videoconferencing.
To use this feature, select Enable. To disable the DMZ feature, select Disable.
DMZ Host IP Address To expose one PC, enter the computer’s IP address.
Click Save to save your changes, or click Cancel to undo your changes.
Setup > MAC Address Clone
Some ISPs require that you register a MAC address. This feature “clones” your
network adapter’s MAC address onto the router, and prevents you from having to
call your ISP to change the registered MAC address to the router’s MAC address.
The router’s MAC address is a 12-digit code assigned to a unique piece of
hardware for identification.
Setup > MAC Address Clone
MAC Address Clone Select Enabled or Disabled from the drop-down menu.
MAC Address Enter the MAC Address registered with your ISP in this field.
Clone My PC’s MAC When MAC Address Clone is enabled, click this button to
copy the MAC address of the network adapter in the computer that you use to
connect to the web interface.
Click Save to save your changes, or click Cancel to undo your changes.
To Next Page
Loading...
Need help?
General
