Name: Cisco RVS4000 - Gigabit Security Router
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Cisco RVS4000 Security Router with VPN Administrator Guide 182

Cisco ProtectLink Web Service

Overview

The optional Cisco ProtectLink Web service provides security for your network. It

filters website addresses (URLs), and blocks potentially malicious websites.

ProtectLink is available for online purchase through online resellers such as

CDW.com and PCConnection.com.

This appendix explains how to use this service and includes these sections:

• How to Access the Configuration Utility, page182

• How to Purchase, Register, or Activate the Service, page183

• How to Use the Service, page185

How to Access the Configuration Utility

STEP 1 For local access of the router’s configuration utility, launch your web browser, and

enter the router’s default IP address, 192.168.1.1, in the Address field. Press the

Enter key.

NOTE If the Remote Management feature on the Firewall > General window has been

enabled, then users with administrative privileges can remotely access the

configuration utility. Use http://<WAN IP address of the router>, or use https://

<WAN IP address of the router> if you have enabled the HTTPS feature.

STEP 2 A login window prompts you for your User name and Password. Enter admin in the

User name field, and enter admin in the Password field. (You can change the

Password on the Setup > Password window.) Then click OK.

Other manuals for Cisco RVS4000 - Gigabit Security Router

Questions and Answers:

Need help?

Do you have a question about the Cisco RVS4000 - Gigabit Security Router and is the answer not in the manual?

General