Cisco RVS4000 - Gigabit Security Router Administration Guide

F
Cisco RVS4000 Security Router with VPN Administrator Guide 190
Specifications
The Cisco RVS4000 4-Port Gigabit Security Router with VPN specifications are
described in this appendix.
Specifications
Performance
Setup/Config
Model
RVS4000
Standards
IEEE802.3, 802.3u, 802.1X, RFC791 (IP Protocol), RFC2460, IPv4
(RFC791), IPv6 (RFC2460), RIPv1 (RFC1058), RIPv2 (RFC1723)
Ports
Ethernet, Power
Buttons
Reset
Cabling Type
UTP CAT 5e or better
LEDs
POWER, DIAG, IPS, ETHERNET (1-4), INTERNET
Operating System
Linux
NAT Throughput
800 Mbps when IPS is disabled
Web User Interface
Built-in web UI for easy browser-based configuration
(HTTP/HTTPS)

Cisco RVS4000 - Gigabit Security Router Specifications

General

WAN Ports	1 x 10/100/1000 Mbps
LAN Ports	4 x 10/100/1000 Mbps
VPN Support	IPSec, PPTP
Wireless	No
QoS	Yes
Power Supply	12V DC, 1.5A
Humidity	10% to 85% non-condensing
Firewall	SPI Firewall
VPN Throughput	30 Mbps
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Management	Web-based