Name: Cisco RVS4000 - Gigabit Security Router
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Setting Up and Configuring the Router

Status

Cisco RVS4000 Security Router with VPN Administrator Guide 95

Path Cost The RSTP path cost for the designated ports. Enter a number from 1 to

200000000, or type the word auto (autogenerated path cost). The default is auto.

The default is auto.

Status

Status > Gateway

Firmware Version Displays the Gateway’s current firmware.

MAC Address Displays the Gateway MAC Address, as seen by your ISP.

Current Time Displays the time, based on the time zone you selected on the

Setup menu.

Internet Connection

Connection Type Displays the type of the connection.

Interface Displays the Gateway Internet Interface.

IP Address Displays the Gateway Internet IP Address.

Subnet Mask Displays the Subnet Mask for the IP address above.

Default Gateway Displays your ISP’s Gateway.

Other manuals for Cisco RVS4000 - Gigabit Security Router

Questions and Answers:

Need help?

Do you have a question about the Cisco RVS4000 - Gigabit Security Router and is the answer not in the manual?

General