EasyManua.ls Logo

Cisco RVS4000 - Gigabit Security Router

Cisco RVS4000 - Gigabit Security Router
195 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Setting Up and Configuring the Router
Setup
Cisco RVS4000 Security Router with VPN Administrator Guide 30
5
Static IP
If your connection uses a permanent IP address to connect to the Internet, then
select Static IP.
Static IP
Internet IP Address The routers IP address, when seen from the WAN, or the
Internet. Your ISP will provide you with the IP Address to specify here.
Subnet Mask The routers Subnet Mask, as seen by external users on the Internet
(including your ISP). Your ISP will provide you with the Subnet Mask.
Default Gateway Your ISP will provide you with the Default Gateway Address,
which is the ISP servers IP address.
Primary DNS (Required) and Secondary DNS (Optional) Your ISP will provide
you with at least one DNS (Domain Name System) Server IP Address.
Click Save to save your changes, or click Cancel to undo your changes.

Table of Contents

Other manuals for Cisco RVS4000 - Gigabit Security Router

Related product manuals