Cisco RVS4000 - Gigabit Security Router

Setting Up and Configuring the Router
QoS
Cisco RVS4000 Security Router with VPN Administrator Guide 69
5
Priority
QoS > Bandwidth Management - Priority
Service Select the service from the drop-down menu. If it does not contain the
service you need, click Service Management to add the service.
Direction Select Upstream for outbound traffic or Downstream for inbound
traffic from the drop-down menu.
Priority Select High, Medium, Normal, or Low priority for the service. The default
is Medium.
Enable Check this box to enable this Priority Rule.
Add to list After a rule is set up, click this button to add it to the list. The list can
contain a maximum of 15 entries.
Delete selected application Click this button to delete a rule from the list.
Click Save to save your changes, or click Cancel to undo your changes.