Name: Cisco RVS4000 - Gigabit Security Router
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Setting Up and Configuring the Router

L2 Switch

Cisco RVS4000 Security Router with VPN Administrator Guide 87

VLANs function at layer 2. Since VLANs isolate traffic within the VLAN, a Layer 3

router is needed to allow traffic flow between VLANs. Layer 3 routers identify

segments and coordinate with VLANs.

VLANs are broadcast and multicast domains. Broadcast and multicast traffic is

transmitted only in the VLAN in which the traffic is generated.

The RVS4000 supports up to 4 VLANs, including the default VLAN.

L2 Switch > Create VLAN

VLAN ID The VLAN ID number. This can be any number from 2 to 3290, or from

3293 to 4094. (VLAN ID 1 is reserved for the default VLAN, which is used for

untagged frames received on the interface. VLAN IDs 3291-3292 are reserved

and cannot be used.) To create a VLAN, enter the ID number and click Add VLAN.

VLAN ID Range To create multiple VLANs with a range of ID numbers, enter the

starting and ending ID numbers and click Add Range.

Delete Selected VLAN To delete a VLAN, select it form the VLAN list and click

Delete Selected VLAN.

Other manuals for Cisco RVS4000 - Gigabit Security Router

Questions and Answers:

Need help?

Do you have a question about the Cisco RVS4000 - Gigabit Security Router and is the answer not in the manual?

General