Cisco Small Business 200 Series Administration Guide

Security
Secure Sensitive Data Management
Cisco Small Business 200 Series Smart Switch Administration Guide 255
19
To define authentication methods for an access method:
STEP 1 Click Security > Management Access Authentication.
STEP 2 Enter the Application (type) of the management access method.
STEP 3 Select Authorization to enable both authentication and authorization of the user
by the list of methods described below. If the field is not selected, only
authentication is performed. If Authorization is enabled, the read/write privileges
of users are checked. This privilege level is set in the User Accounts page.
STEP 4 Use the arrows to move the authorization/authentication method between the
Optional Methods column and the Selected Methods column. Methods are
attempted in the order that they appear.
STEP 5 Use the arrows to move the authentication method between the Optional Methods
column and the Selected Methods column. The first method selected is the first
method that is used.
• RADIUS—User is authorized/authenticated on a RADIUS server. You must have configured one or
more RADIUS servers. For the RADIUS server to grant access to the web-based configuration utility,
the RADIUS server must return cisco-avpair = shell:priv-lvl=15.
• None—User is allowed to access the device without authorization/authentication.
• Local—Username and password are checked against the data stored on the local device. These
username and password pairs are defined in the User Accounts page.
NOTE The Local or None authentication method must always be selected last. All authentication
methods selected after Local or None are ignored.
STEP 6 Click Apply. The selected authentication methods are associated with the access
method.
Secure Sensitive Data Management
See Security: Secure Sensitive Data Management.

Cisco Small Business 200 Series Specifications

General

Brand	Cisco
Model	Small Business 200 Series
Category	Switch
Language	English