Administration
System Settings
Cisco Small Business 200 Series Smart Switch Administration Guide 59
6
System Settings
The System Summary page provides a graphic view of the device, and displays device status, hardware
information, firmware version information, general PoE status, and other items.
Displaying the System Summary
To view system information:
STEP 1 Click Status and Statistics > System Summary.
System Information:
• System Description—A description of the system.
• System Location—Physical location of the device. Click Edit to go the System Settings page to
enter this information.
• System Contact—Name of a contact person. Click Edit to go the System Settings page to enter this
information.
• Host Name—Name of the device. Click Edit to go the System Settings page to enter this information.
By default, the device hostname is composed of the word device concatenated with the three least
significant bytes of the device MAC address (the six furthest right hexadecimal digits).
• System Object ID—Unique vendor identification of the network management subsystem contained
in the entity (used in SNMP).
• System Uptime—Time that has elapsed since the last reboot.
• Current Time—Current system time.
• Base MAC Address—Device MAC address.
SG200-26FP SG200-
26FP V.0
26-Port Gigabit PoE Smart Switch 180W 24
SG200-50FP SG200-
50FP V.0
50-Port Gigabit PoE Smart Switch 375W 48
Model Name Product ID
(PID)
Description of Ports on Device Power
Dedicated
to PoE
No. of Ports
that Support
PoE