Cisco Small Business 200 Series

Security: SSH Client
Before You Begin
Cisco Small Business 200 Series Smart Switch Administration Guide 284
21
- 3des-cbc
- arcfour
- aes192-cbc
- aes256-cbc
• Message Authentication Code Algorithms
- hmac-sha1
- hmac-md5
NOTE Compression algorithms are not supported.
Before You Begin
The following actions must be performed before using the SCP feature:
• When using the password authentication method, a username/password must be set up on the SSH
server.
• When using public/private keys authentication method, the public key must be stored on the SSH
server.
Common Tasks
This section describes some common tasks performed using the SSH client. All pages referenced are
pages found under the SSH Client branch of the menu tree.