Cisco Small Business 200 Series

SNMP
SNMP Engine ID
Cisco Small Business 200 Series Smart Switch Administration Guide 322
24
The private Object IDs are placed under:
enterprises(1).cisco(9).otherEnterprises(6).ciscosb(1).switch001(101).
SNMP Engine ID
The Engine ID is used by SNMPv3 entities to uniquely identify them. An SNMP agent is considered an
authoritative SNMP engine. This means that the agent responds to incoming messages (Get, GetNext,
GetBulk, Set) and sends trap messages to a manager. The agent's local information is encapsulated in fields
in the message.
Model Name Description Object ID
SG200-18 16 GE ports + 2 GE special-purpose
combo ports
9.6.1.88.18.1
SG200-26 24 GE ports + 2 GE special-purpose
combo-ports
9.6.1.88.26.1
SG200-26P 24 GE ports + 2 GE special-purpose
combo-ports
9.6.1.88.26.2
SG200-50 48 GE ports + 2 GE special-purpose
combo-ports
9.6.1.88.50.1
SG200-50P 48 GE ports + 2 GE special-purpose
combo-ports
9.6.1.88.50.2
SF200-24 24 FE ports + 2 GE special-purpose
combo-ports
9.6.1.87.24.1
SF200-24P 24 FE ports + 2 GE special-purpose
combo-ports
9.6.1.87.24.2
SF200-48 48 FE ports + 2 GE special-purpose
combo-ports
9.6.1.87.48.1
SF200-48P FE1-FE48, GE1-GE4. 48 FE ports + 2 GE
special-purpose combo-ports
9.6.1.87.48.2
SG200-10FP 10-Port Gigabit PoE Smart Switch 9.6.1.88.10.3
SF200-24FP 24-Port 10/100 PoE Smart Switch 9.6.1.88.24.3
SG200-26FP 26-Port Gigabit PoE Smart Switch 9.6.1.88.26.3
SG200-50FP 50-Port Gigabit PoE Smart Switch 9.6.1.88.50.3