Cisco Small Business 200 Series Administration Guide

Security: Secure Sensitive Data Management
Menu CLI and Password Recovery
Cisco Small Business 200 Series Smart Switch Administration Guide 303
22
Menu CLI and Password Recovery
The Menu CLI interface is only allowed to users if their read permissions are Both or Plaintext Only. Other
users are rejected. Sensitive data in the Menu CLI is always displayed as plaintext.
Password recovery is currently activated from the boot menu and allows the user to log on to the terminal
without authentication. If SSD is supported, this option is only permitted if the local passphrase is identical
to the default passphrase. If a device is configured with a user-defined passphrase, the user is unable to
activate password recovery.
Configuring SSD
The SSD feature is configured in the following pages:
• SSD properties are set in the Properties page.
• SSD rules are defined in the SSD Rules page.
SSD Properties
Only users with SSD read permission of Plaintext-only or Both are allowed to set SSD properties.
To configure global SSD properties:
STEP 1 Click Security > Secure Sensitive Data Management > Properties. The
following field appears:
• Current Local Passphrase Type—Displays whether the default passphrase or a user-defined
passphrase is currently being used.
STEP 2 Enter the following Persistent Settings fields:
HTTP based file transfer Insecure HTTPS-based file transfer
HTTPS based file transfer Secure
Management Channel SSD Management
Channel Type
Parallel Secured
Management Channel

Cisco Small Business 200 Series Specifications

General

Brand	Cisco
Model	Small Business 200 Series
Category	Switch
Language	English