Cisco Small Business 200 Series Administration Guide

Administration
Time Settings
Cisco Small Business 200 Series Smart Switch Administration Guide 62
6
To set the idle session timeout of an HTTP or HTTPS session:
STEP 1 Click Administration > Idle Session Timeout.
STEP 2 Select the timeout for the each session from the corresponding list. The default
timeout value is 10 minutes.
STEP 3 Click Apply to set the configuration settings on the device.
Time Settings
See Administration: Time Settings.
System Log
See Administration: System Log.
File Management
See Administration: File Management.
Rebooting the Device
Some configuration changes, such as enabling jumbo frame support, require the system to be rebooted
before they take effect. However, rebooting the device deletes the Running Configuration, so it is critical
that the Running Configuration is saved to the Startup Configuration before the device is rebooted. Clicking
Apply does not save the configuration to the Startup Configuration. For more information on files and file
types, see the System Files section.
You can back up the device configuration by using
Administration > File Management > Copy/Save
Configuration
or clicking Save at the top of the window. You can also upload the configuration from a
remote device. See the Download/Backup Configuration/Log section.

Cisco Small Business 200 Series Specifications

General

Brand	Cisco
Model	Small Business 200 Series
Category	Switch
Language	English