User Guide| LQ Series 4.0
Note: You need to configure the Domain setting if your PBX is set up to work with
more than one domain. Configuring the domain in the CCM is recommended as
the PBX may have only one domain, but this can change. Please refer to your
network and PBX administration if you need advice on this.
2. Register SIP clients. Give the LQ unit the Username and Password of an
extension already set up in the SIP server. Assign this user extension to an LQ
unit to register the client with the LQ. Register up to 8 SIP clients on each LQ
device.
Page 103
To Next Page
Loading...
