User Guide| LQ Series 4.0
13.6.3
Making and accepting calls: LQ SIP standalone
Note: The SIP enabled port MUST be put in a Channel before you can make and accept
calls.
1. Accept incoming calls:
a. If an external user (for example x.2005) dials into the LQ-SIP line then the
LQ unit will auto-answer and establish the call. Audio will then pass between
all members of the Channel associated with the SIP line.
b. The CCM will show the incoming caller number.
c. The CCM user can hang up the call by selecting the phone icon and hanging
up.
2. Use the CCM to dial out:
a. Type in the dial-out window the phone number or address of the
telephoneline/extension you want to reach.
b. Once the call is established, audio will pass between all members of the
Channel associated with the SIP line.
c. The CCM will show the dialed phone number.
Page 106
To Next Page
Loading...
Need help?
General
