cobas h 232 User Manual

Performing a Test
127
Without patient list
3 Touch Patient Test.
4 If you selected the Patient ID as optional,
you can enter or scan a Patient ID.
If you selected the Patient ID as required,
you must enter or scan the Patient ID.
If you selected no Patient ID (None), the
meter automatically proceeds to the next
step.
5 Touch to confirm the ID, or touch
to cancel the ID entry.
Continue reading on page 130.
A
PID111SCHULZM457
BCDE
FGHI J
KLMNO
P
QRST
UVWX Y
Z
, 123
Patient ID
Scan

cobas h 232 Specifications

General

Device Type	Point-of-care analyzer
Sample Type	Whole blood, plasma
Measured Parameters	Troponin T, Myoglobin, D-Dimer, NT-proBNP
Connectivity	USB
Intended Use	cardiac markers
Data Management	LIS connectivity
Throughput	Single test
Sample Volume	150 µL
Operating Temperature	15-30 °C
Operating Humidity	10-85% (non-condensing)
Display	Color touchscreen
Measurement Principle	Electrochemiluminescence immunoassay (ECLIA)