cobas h 232 User Manual

Performing a Test
128
With patient list
3 Touch Patient Test.
Patient lists can only be created on a DMS
and must be transferred to the meter. Lists
cannot be created on the meter.
4 Touch or to scroll through the list.
Select the patient to be tested by touching
the corresponding button.
5 If the patient is not in the list, touch New
to create a new entry. You must now enter
a Patient ID manually or scan it using the
barcode scanner.
Select Patient ID
New
PID001GERTA123
Anders, Gert
PID001CHAPLINC123
Chaplin, Charlene
PID001BERNDH123
Bernd, Hans
PID001FRENZENA12
Frenzen, Alice
PID230ONEALJ1234
ONeal, John
Scan
04/19/2016
A
PID111SCHULZM457
BCDE
FGHI J
KLMNO
P
QRS T
UVWX Y
Z
, 123
Patient ID
Scan

cobas h 232 Specifications

General

Device Type	Point-of-care analyzer
Sample Type	Whole blood, plasma
Measured Parameters	Troponin T, Myoglobin, D-Dimer, NT-proBNP
Connectivity	USB
Intended Use	cardiac markers
Data Management	LIS connectivity
Throughput	Single test
Sample Volume	150 µL
Operating Temperature	15-30 °C
Operating Humidity	10-85% (non-condensing)
Display	Color touchscreen
Measurement Principle	Electrochemiluminescence immunoassay (ECLIA)