cobas h 232 User Manual

Troubleshooting
181
Communication Problems with the Data Management System via RF
The cobas h 232 meter is
unable to communicate
with the Data Manage-
ment System.
■ Check WLAN functionality on the meter (see the Wireless
Setup screens in section “Diagnostics” starting on page 80).
■ Dock the RF enabled meter into a hard-wired base unit to
transfer the data.
■ Reset the meter.
■ If the error persists, contact your Roche representative.
Display/symptom Description

cobas h 232 Specifications

General

Device Type	Point-of-care analyzer
Sample Type	Whole blood, plasma
Measured Parameters	Troponin T, Myoglobin, D-Dimer, NT-proBNP
Connectivity	USB
Intended Use	cardiac markers
Data Management	LIS connectivity
Throughput	Single test
Sample Volume	150 µL
Operating Temperature	15-30 °C
Operating Humidity	10-85% (non-condensing)
Display	Color touchscreen
Measurement Principle	Electrochemiluminescence immunoassay (ECLIA)