Meter Setup
76
4 From the Setup-Result Units menu, touch
DD Result Units.
5 From the Select DD Res. Unit menu, select
the unit to be used for the D-Dimer result
display.
The current setting is highlighted (white type
on a blue background). You may select from
the following options:
■ g/mL
■ ng/mL
■ mg/L
■ g/L
6 Touch to save this setting, or touch
to exit this menu without saving any
changes. The display automatically
returns to the previous screen.
TT Result Units
Setup - Result Units
DD Result Units
04/19/2016
ng/mL
mg/L
µg/L
Select DD Res. Unit
µg/mL
04/19/2016
To Next Page
Loading...