cobas h 232 - Page 87

Meter Setup
87
Changing an existing Administrator ID:
1 From the Main Menu, touch Setup to
open the meter settings.
2 From the Setup menu, touch ID Setup.
3 Using the onscreen keypad, enter the
valid Administrator ID.
The ID Setup is displayed. The Adminis-
trator ID button is highlighted, which
means an Administrator ID is active.
4 Touch Administrator ID and use the
onscreen keypad to enter a new ID of
choice (enter it twice).
Main Menu
Control Test
Review Results
Setup
Patient Test
09:15 am
04/19/2016
Data Handling
ID Setup
Lockout
Basics
Optional Screens
Setup
04/19/2016
A
****|
BCDE
FGHI J
KLMNO
P
QRS T
UVWX Y
Z
123
Enter Administrator ID
Operator ID
Patient ID
Administrator ID
Setup - ID Setup
04/19/2016