cobas h 232 User Manual

Meter Setup
92
With an Operator list being transferred to the meter, the Operator ID options are different from
the options in “standalone” mode.
If you want to create a list of Operator IDs from which you can select an operator, additional
software (a data management system) and a WLAN connection or the Handheld Base Unit
are required (for more details see “Data handling”, starting on page 163).
1 From the Main Menu, touch Setup to
open the meter settings.
2 From the Setup menu, touch ID Setup.
3 From the Setup-ID Setup menu, touch
Operator ID.
You may select from the following options:
■ List (Operator ID must be selected from
the list or scanned using the barcode
scanner)
■ None (Operator ID cannot be entered or
selected)
■ Hidden List (Operator ID must be
entered using the barcode scanner or the
onscreen keypad)
4 Touch the button with the setting of
choice. Your selection is now highlighted.
5 Touch to save this setting, or touch
to exit this menu without saving any
changes. The display automatically
returns to the previous screen.
Main Menu
Control Test
Review Results
Setup
Patient Test
09:15 am
04/19/2016
Data Handling
ID Setup
Lockout
Basics
Optional Screens
Setup
04/19/2016
Operator ID
Patient ID
Administrator ID
Setup - ID Setup
04/19/2016
Select Operator ID
List
None
Hidden List
04/19/2016

cobas h 232 Specifications

General

Device Type	Point-of-care analyzer
Sample Type	Whole blood, plasma
Measured Parameters	Troponin T, Myoglobin, D-Dimer, NT-proBNP
Connectivity	USB
Intended Use	cardiac markers
Data Management	LIS connectivity
Throughput	Single test
Sample Volume	150 µL
Operating Temperature	15-30 °C
Operating Humidity	10-85% (non-condensing)
Display	Color touchscreen
Measurement Principle	Electrochemiluminescence immunoassay (ECLIA)