NGT—Channel additions
136 NGT Transceiver System Technical Service Manual
1 Scroll to the mode (or one of the modes) you want to use with the channel.
1 Press to save the mode.
The new channel is created and the List Manager remains open.
If you want to view the channel you have created, close the List Manager by
pressing .
1 Press until Main Menu is displayed.
NOTE
If multiple modes can be added to the channel the transceiver asks
you if you want to add another mode. Do one of the following:
• to add another mode, press , scroll to the mode you want to
add, then press again
• if you do not want to add another mode, press
NOTE
If you disabled the transmit frequency, dashes are displayed at the
bottom left of the channel screen.
To Next Page
Loading...
