EasyManuals Logo

Codan NGT 2012 RF User Manual

Codan NGT 2012 RF
840 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #116 background imageLoading...
Page #116 background image
NGT—Technical description (2010)
82 NGT Transceiver System Technical Service Manual
Pre-driver stage
The levelled RF from the gain control stage is passed via T201 to the Class A push-pull
amplifier formed by V204 and V205. L202 and C207 provide a small amount of high
frequency gain peaking to ensure the overall gain is flat with frequency.
The levelled RF from the gain control stage is passed via T201 to the Class A push-pull
amplifier formed by V204 and V205. L202 and C207 provide a small amount of gain
peaking to ensure the overall gain is flat with frequency.
Driver stage
The signal from the pre-driver stage goes via T202 to the driver stage. The driver is a
Class B push-pull amplifier that provides a voltage drive to the output stage.
Each side of the amplifier has three transistors in parallel (V207, V208 and V209, and
V210, V211 and V212). These transistors have resistors on their emitters to force them to
share the load.
The bias for the driver stage, provided by the emitter follower V206 and set by R222
(DR. BIAS), is applied to the centre tap of T202.
The signal from the pre-driver stage goes via T202 to the driver stage. The driver is a
Class B push-pull amplifier that provides a current drive to the output stage.
V207 and V208 have collector to base feedback to flatten the gain. R273 balance control
varies the gain slightly in V208, which is used to balance the second harmonic (see
page 185, Adjusting balance control).
The bias for the driver stage, provided by V214 and V206, and set by R222 (DR. BIAS),
is applied to the centre tap of T202.
The signal from the pre-driver stage goes via T202 to the driver stage. The driver is a
Class B push-pull amplifier that provides a current drive to the output stage.
V207 and V208 have drain to gate feedback to allow balance adjustment to the second
harmonic (see page 185, Adjusting balance control).
The bias for the driver FET is provided to each gate individually via R222 (DR BIAS 1)
and R235 (DR BIAS 2) from the temperature-compensated reference IC201/A.
ALTERNATIVE TEXT
Drawing 04-03169
ALTERNATIVE TEXT
Drawing 04-03369, or
Drawing 04-03542
ALTERNATIVE TEXT
Drawing 04-03169
ALTERNATIVE TEXT
Drawing 04-03369
ALTERNATIVE TEXT
Drawing 04-03542

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Codan NGT 2012 RF and is the answer not in the manual?

Codan NGT 2012 RF Specifications

General IconGeneral
BrandCodan
ModelNGT 2012 RF
CategoryTransceiver
LanguageEnglish

Related product manuals