8571—Overview and specifications
NGT Transceiver System Technical Service Manual 321
Master site
The master site controls the slave sites. In most cases, this site is the location of the user.
As well as the controlling function over the system, the master site may also be the
location of the transmitter and/or the standby receiver.
The minimum equipment at the master site comprises:
• an NGT RF Unit 2010, with fan if the site is used for transmission
• a Split-site Interface Controller 2030
• a Junction Box 2030
• a Handset 2020
• a loudspeaker
• an NGT Split-site Remote Interface 8571
• a transceiver supply
• an antenna, if the site is required to transmit or perform as a standby receiver
Slave sites
The slave sites are controlled by the master site. The function of these sites may be a
slave receiver, a slave transmitter, or a slave transceiver.
The minimum equipment at a slave site comprises:
• an NGT RF Unit 2010, with fan if the site is used for transmission
• a 2030 Split-site Interface Controller
• a 2020 Handset
• a loudspeaker
• an 8571 NGT Split-site Remote Interface
• a transceiver supply
• an antenna
To Next Page
Loading...
