NGT—Channel additions
NGT Transceiver System Technical Service Manual 143
1 When you have edited the settings, press until you return to the channel screen.
1 Press until Main Menu is displayed.
Name of
setting
How to edit the setting
Receive Freq Do one of the following:
• To erase the frequency displayed, start typing. Enter the new
frequency in kilohertz.
• To place the cursor at the end of the line so you can
backspace over the text and/or enter new text, press . Enter
the new frequency in kilohertz.
When the frequency is correct, press .
Transmit Freq Do one of the following:
• To erase the frequency displayed, start typing. Enter the new
frequency in kilohertz.
• To place the cursor at the end of the line so you can
backspace over the text and/or enter new text, press . Enter
the new frequency in kilohertz.
• To disable transmission on this channel, erase the transmit
frequency by pressing repeatedly.
When the frequency is correct (or erased), press .
Mode Do one of the following:
• To add a mode, press to display the first mode, then
hold to open the List Manager.
Select Add item, then select the mode you want to add to
the channel.
• To edit a mode, scroll to the mode you want to edit, then
hold .
Select the mode you want.
• To delete a mode, scroll to the mode you want to delete, then
hold to open the List Manager.
Select Delete item, then press to confirm that you want
to delete the item.
As each channel must have at least one mode you cannot
delete the last mode from a channel.
The List Manager remains open. If you want to return to the
setting, close the List Manager by pressing .
To Next Page
Loading...
Need help?
General
