Do not know how to remove a media card correctly.
Cause Solution
The computer’s software is used to safely eject the card. On the Windows desktop, open Computer, right-click on the
corresponding drive icon, and select Eject. Then pull the
card out of the slot.
NOTE: Never remove the card when the LED is flashing
After installing the media card reader and booting to Windows, the reader and the inserted cards are not recognized
by the computer.
Cause Solution
The operating system needs time to recognize the device if
the reader was just installed into the computer and you are
turning the PC on for the first time.
Wait a few seconds so that the operating system can
recognize the reader and the available ports, and then
recognize whatever media is inserted in the reader.
Solving Media Card Reader Problems
159
To Next Page
Loading...
Need help?
General