Compaq 100eu - All-in-One PC - Expansion Cards

Expansion Cards
Description Spare part number
Expansion cards not spared
The computer has two PCI Express x1 expansion slots. The expansion slots accommodate full-height
or half-height expansion cards.
Expansion Slot Locations
Figure 6-5 Expansion Slot Locations
Table 6-2 Expansion Slot Locations
Item Description
1 PCI Express x1 expansion slot
2 PCI Express x1 expansion slot
To remove, replace, or add an expansion card:
1. Prepare the computer for disassembly (
Preparation for Disassembly on page 43).
2. Remove the access panel (
Access Panel on page 44).
3. Locate the correct vacant expansion socket on the system board and the corresponding
expansion slot on the back of the computer chassis.
50 Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis