Five menu headings appear on the Computer Setup Utility screen:
●
Main
●
Advanced
●
Power
●
Boot
●
Exit
Use the arrow keys to select the appropriate heading, then press Enter. Use the arrow (up and
down) keys to select the option you want, then press Enter. To return to the previous screen,
press Esc.
CAUTION: Do NOT turn the computer power OFF while the ROM is saving the Computer Setup
(F10) changes because the CMOS could become corrupted. It is safe to turn off the computer only
after exiting the F10 Setup screen.
Computer Setup—Main
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-1 Computer Setup—Main
Option Description
System Time Allows you to set system time.
System Date Allows you to set system date.
System IDs Allows you to view or change the following system identification information:
●
Product Name (view only)
●
Serial Number (view only)
●
UUID (view only)
●
SKU Number (view only)
●
Family Name (view only)
●
Feature Byte (view only)
●
Build ID (view only)
Language Allows you to select language.
Floppy Diskette A Allows you to set drive A to:
●
Disabled
●
1.44 MB 3.5”
●
Not Installed
Compaq 315eu MT Model – Computer Setup (F10) Utilities
5
To Next Page
Loading...
