Table 2-1 Computer Setup—Main (continued)
1st Drive
2nd Drive
3rd Drive
4th Drive
For each, allows you to adjust or view:
●
Port Configuration - disable/enable the SATA port for the selected drive
●
Capacity (Size - HDD only) - view only
●
Transfer Mode- view only
●
Smart Support - run HDD self-test for selected channel:
◦
SMART Status Check
◦
SMART Short Self-Test
◦
SMART Extended Self-Test
System Information Allows you to view:
●
Installed Memory
●
Memory Bank 1
●
Memory Bank 2
●
Memory Bank 3
●
Memory Bank 4
●
BIOS Revision
●
Core Version
6 Chapter 2 Computer Setup (F10) Utility
To Next Page
Loading...
