Compaq 100eu - All-in-One PC User Manual

8 Removal and Replacement Procedures
All-in One (AIO) Chassis
The following sections provide information about disassembling various components of the all-in-one
computer.
Preparing to disassemble the computer
To avoid injury and equipment damage, always complete the following steps in order, when opening
the computer.
1. Remove all media (CD, DVD, etc.) from the computer.
2. Shut down the computer.
3. After the system has completely shut down, disconnect the power adapter from the back of the
computer.
4. Disconnect all other attached cables from the back of the computer.
5. Place the computer face down on a soft flat surface. HP recommends that you set down a
blanket, towel, or other soft cloth to protect the touch screen surface from scratches or other
damage.
WARNING! Beware of sharp edges inside the chassis.
106 Chapter 8 Removal and Replacement Procedures All-in One (AIO) Chassis

Compaq 100eu - All-in-One PC Specifications

General

Brand	Compaq
Model	100eu - All-in-One PC
Category	Desktop
Language	English