EasyManuals Logo

Compaq 100eu - All-in-One PC User Manual

Compaq 100eu - All-in-One PC
215 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #151 background imageLoading...
Page #151 background image
10 Computer Diagnostic Features
Hewlett-Packard Vision Diagnostics
NOTE: HP Vision Diagnostics is included on CD with some computer models only.
The Hewlett-Packard Vision Diagnostics utility allows you to view information about the hardware
configuration of the computer and perform hardware diagnostic tests on the subsystems of the
computer. The utility simplifies the process of effectively identifying, diagnosing, and isolating
hardware issues.
The Survey tab is displayed when you invoke HP Vision Diagnostics. This tab shows the current
configuration of the computer. From the Survey tab, there is access to several categories of
information about the computer. Other tabs provide additional information, including diagnostic test
options and test results. The information in each screen of the utility can be saved as an html file and
stored on a USB flash drive.
Use HP Vision Diagnostics to determine if all the devices installed on the computer are recognized by
the system and functioning properly. Running tests is optional but recommended after installing or
connecting a new device.
You should run tests, save the test results, and print them so that you have printed reports available
before placing a call to the Customer Support Center.
NOTE: Third party devices may not be detected by HP Vision Diagnostics.
Accessing HP Vision Diagnostics
To access HP Vision Diagnostics, you must create a Recovery Disc Set then boot to the CD
containing the utility. It can also be downloaded from
http://www.hp.com and either burned to CD or
installed to a USB flash drive. See
Downloading the Latest Version of HP Vision Diagnostics
on page 145 for more information.
NOTE: If you have already downloaded HP Vision Diagnostics to a CD, then begin the following
procedure at step 2.
1. In Windows Explorer, go to C:\SWSetup\ISOs and burn the file Vision Diagnostics.ISO to a
CD.
2. While the computer is on, insert the CD in the Optical Drive on the computer.
3. Shut down the operating system and turn off the computer.
4. Turn on the computer. The system will boot into HP Vision Diagnostics.
Hewlett-Packard Vision Diagnostics
141

Table of Contents

Other manuals for Compaq 100eu - All-in-One PC

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Compaq 100eu - All-in-One PC and is the answer not in the manual?

Compaq 100eu - All-in-One PC Specifications

General IconGeneral
BrandCompaq
Model100eu - All-in-One PC
CategoryDesktop
LanguageEnglish

Related product manuals