Compaq 100eu - All-in-One PC User Manual

Hard Drive
Description Spare part number
Hard drive, 160 GB 619967-001
The hard drive is secured with four screws, two on each side. The drive uses one combination data/
power connector.
1. Prepare the computer for disassembly (see
Preparing to disassemble the computer
on page 106).
2. Remove the stand (see
Stand on page 111).
3. Remove the hinge cover (see
Hinge Cover on page 112).
4. Remove the memory/optical drive cover (see
Memory/Optical Drive Cover on page 107).
5. Remove the outer rear cover (see
Rear Cover on page 113).
6. Remove the rear metal cover (see
Rear Metal Cover on page 118).
7. Remove the two screws from the left side of the hard drive.
Figure 8-14 Removing the left hard drive screws
120 Chapter 8 Removal and Replacement Procedures All-in One (AIO) Chassis

Compaq 100eu - All-in-One PC Specifications

General

Brand	Compaq
Model	100eu - All-in-One PC
Category	Desktop
Language	English